Sector: Auxiliar Systems and Packages

Cooling system is designed to provide water free from oxygen to avoid corrosion in the system. The circuit is sealed from the atmosphere and under constant hydrogen overpressure. Water is…

A hydrogen gas dryer is a system to dry and/or remove water from hydrogen gas for use in hydrogen-cooled generators, preventing deterioration of the hydrogen's cooling properties. Depending on customers’…

Accumulator skids are designed to prevent low system pressure trips during transient events and to provide additional temporary flow when required.

Flenco provides a wide range of air systems to produce and distribute compressed air to different utilities, control air for instrument and valves all-over the plant.

For non-Dry Low Emissions (DLE) turbines without a NOx abatement system, a water injection system can be added to lower NOx emissions. This system injects demineralized water into the combustor…

Turbine water wash systems can operate in both online (during turbine run) and offline (during turbine stop) mode. They deliver specified water and detergent flow to the nozzles, thus maintaining…

Gas cooling systems cool by filling the generator with hydrogen, maintain under pressure, check the gas purity and evacuate it. To prevent the formation of explosive gas mixtures, the air…

Gas seal panels, according to ISO 10438:2008 Part 4 and API 614 Fifth Edition Chapter 4, are designed to supply seal and buffer gas to the shaft seals. They include…

Cooling water systems or coolant skids, pump cooling water to the compressor cylinders, as the power input to the compressor is converted to heat in the compression process. Heat is…

Assembly of the complete compressor train on the base frames, including mechanical (piping around & structures), electrical, instrumental and controls. Flenco offers a complete testing capability, while the modular design…